Software Requirements

Following is the minimum recommended software required to run the MADCAP Server software.

• Microsoft Windows XP
• Microsoft Windows 2000 with Service pack 2
• Microsoft Windows NT 4.0 with Service pack 6a

If the Web Interface is also required, you must have IIS 2.0 or better installed.

Following is the minimum recommended software required to run the MADCAP Thin Client software.

• Microsoft Windows ME or 98
• Microsoft Windows XP, 2000 with Service pack 2, or NT 4.0 with Service pack 6a

Hardware Requirements

Following is the minimum recommended hardware required to run the MADCAP Server software.

• Pentium 800 class processor (or better)
• Server class hardware components
• 512MB Error Checking and Correcting (ECC) RAM
• Tape backup unit
• Multiple SCSI drives in a RAID configuration
• Network Interface card (NIC)
• TCP/IP network environment

Following is the minimum recommended hardware required to run the MADCAP Application or Web interface software.

• Pentium 800 class processor (or better)
• Server class hardware components
• 256MB Error Checking and Correcting (ECC) RAM
• Network Interface card (NIC)
• TCP/IP network environment

Following is the minimum recommended hardware required to run the MADCAP Thin Client software.

• IBM compatible PC (Pentium 90 or better)
• 32MB RAM for Windows 98 or ME, 64MB RAM for Windows NT, 128MB RAM for Windows 2000 or XP
• Network interface card (NIC) or dialup modem
• SVGA monitor